Warning: Last items in stock!
Hair Dryer SC0009 public use, automatic (telephone type)
Delivery term: 2-3 weeks
Machflow® automatic hair dryers with flex hose and handle made in stainless steel for a collective use. It
provides important energy savings and an ultra-fast hair drying. Solutions with an avant-garde design and
with two different finishes (white or satin) so that the dryers can easily blend in with the decoration.
Maximum air power and effective airflow.
Long lasting compact units with anti-
Suitable for very high traffic areas and for collective
Maximum air velocity 205 Km/h.
The hair dryer disconnects automatically after 60
seconds of continuous use.
Components & materials
SC0009: Stainless steel AISI 304 one-piece cover
white Epoxy finish.
SC0009CS: Stainless steel AISI 304 one-piece cover
MOTOR: high pressure brushed motor 400 W, class
F. Motor speed may be adjusted manually by means
of a potentiometer.
HEATING ELEMENT: Cr/Al spiral wire 600W,
thermally protected thanks to a self resettable thermal
cut-out. The heating element has an “on/off” switch to
connect or disconnect it manually. If the heating
element is in the mode “on” (connected), in order to
avoid high temperatures, it has an automatic “on/off”
system. The heating element works continuously
during 15 seconds and after that time it automatically
stops. The stop time can be adjusted between 1 and
5 seconds by means of a potentiometer.
HOSE: made in white polyurethane with stretching
springsteel spiral and with a handle connector made
in PBT (Polybutylene).
HANDLE: made in plastic ABS.
Voltage 220- 240 V
Frequency 50/60 Hz
Electrical Isolation Class I
Total power 200 – 1,000 W
Motor power 400 W
Rpm 14,000 – 19,000
Heating element power 0 - 600 W(on/off switch)
Dimensions 330x265x170 mm
Weight 5.6 Kg
Air velocity 140 – 205 Km/h
Air temperature (10 cm distance/21ºC) 45 ºC
Sound pressure (at 2m) 65-73 dBA
Hose length 800 – 2,000 mm
|2||3%||Up to 20,69 €|
|3||7%||Up to 72,42 €|
|5||10%||Up to 172,43 €|